SupportCompanyDealer LocatorProduct Registration
AmplifiersSignal ProcessorsSpeakersSubwoofersSpecs
Zeus & HFBrutusAtlasGoliath
 

Zeus & HF Subwoofer Highlights

  • Robust 2-inch 4-layer aluminum dual voice-coils to beat the heat
  • Big bass requires a tough cones, such as the high-strength Titanium & Pulp composite cones or HF's Silver Laminate Cones.
  • Dual Voice-Coil Assemblies offers multiple speaker wiring configurations.
  • Optional Zeus Grilles, as shown, feature an antiresonant gasket

  

Zeus Illuminated Subwoofers

Zeus illuminated DVC Subwoofer Series are available in 12-inch "Round" and "Square" profiles, both with Low-Q, Theile/Small parameters for your choice of small sealed or vented enclosure designs. Either subwoofer shape offers dustcap illumination and a broad range of compatible amplifier power classes.

Hifonics HF Subwoofers HF Dual VC & Single Voice Coil subs are available in 10 and 12-inch round profiles also with Low-Q, Theile/Small parameters perfect for small sealed or vented enclosure designs. The single 4-Ohm voicecoil HF version is used most often in subwoofer enclosures with two or more drivers, enabling low-impedance amp loading, without giving up vital cone area. More cone area translates to more SPL.

Both offer "The Power of 1" Reliability. The answer is; Zeus & HF's integrated spider assembly and tinsel lead-in wires. The Hifonics one-piece spider-tinsel lead design eliminates one of the most common modes of subwoofer failure… the dreaded…tinsel lead breakage. AND when the "heat is on" the Hifonics heat-dissipating aluminum CCAW voice-coils disperse the left-over thermal energy into the magnet & frame assembly. You need Hifonic's integrated tinsel leads, if you want sonic reliability.

Zeus Series Features

  • 700-Watts Maxximum Power Handling
  • 350-Watts RMS Power Handling
  • Titanium & Pulp Composite Cones
  • Illuminated Acrylic Zeus Dustcaps
  • Dual 2-Ohm Voice-Coils (DVC / 2+2 Ohms)
    For 4-Ohm and 1-Ohm Applications
  • Black Chrome Speaker Frames
  • Rubber Magnet Boots

HF Series Features:

  • 700-Watts Maxximum Power Handling
  • 350-Watts RMS Power Handling
  • Dual 4-Ohm Voice-Coils
    For 2-Ohm and 8-Ohm Applications
  • Silver Laminate Cones
  • Polypropylene Dustcap
    Chrome Speaker Frames

In-Common HF & Zeus Subwoofer Features:

  • 40oz. Single-Stack Magnet Assemblies
  • 2-inch 4-Layer Aluminum Voice-Coils
  • One-Piece Spider-Tinsel Lead Designs
  • 1.1" Wide Reinforced Rubber Surrounds
  • Nickel-Plated Back-Plate & Push & Insert Terminals
  • Vented And Sealed Enclosure Compatibility
         
 
Zeus and HF Subwoofer T & S Parameters
Model ZS12 ZS12SQ HF10D4 HF12D4 HF1254
Watts Peak Power 700 700 700 700 700
Watts RMS Power 350 350 350 350 350
DVC Imp./Ohms 2 + 2 2 + 2 4 + 4 4 + 4 4
Fs - Hertz 35.62 39.51 32.8 30.57 29.67
Re - Ohms x 2 1.8 1.8 3.6 3.6 3.6 x 1
Qts 0.45 0.57 0.548 0.527 0.548
Vas - Liters 39.5 48.5 43.6 121.7 137.4
Vas - Cu Ft. 1.39 1.72 1.54 4.3 4.85
Xmax - mm 10 10 11 11 11
Xmax - Inches 0.39 0.39 0.43 0.43 0.43
SPL - dB @2.83V 96.29 97.32 89 89.5 90.2
Suggested Zeus & HF Subwoofer Enclosure Size
Sealed Enclosure Designs:
Suggested Internal
Box Vol. Cu Ft. 1 0.5 0.5 0.5 0.5
Box Poly Fill Loose Loose Loose Loose Loose
Vented Enclosure Designs:
Suggested Internal
Box Vol. 1-Cu Ft 1.5-Cu Ft 1-Cu Ft 1.5-Cu Ft 1.5-Cu Ft
Port I.D. x Length [inches] 3.0 x 10 3.5 x 10 3 x 10.5 3 x 8.9 3 x 8.9
Enclosure Resonance 39.89 Hz 37.22 Hz 38 Hz 34 Hz 34 Hz
Port Resonance 41.61 Hz 41.74 Hz 40 Hz 36 Hz 36 Hz
1 - Cu. Ft. = 1728 cubic inches of internal airspace
 
©2006 Maxxsonics, Inc. | All rights reserved
Home